The Talaria Battery Power Connection Sub Cable is the OEM high-current wiring harness between battery, BMS, and controller for Sting Offroad (TL3000) and Sting Onroad (TL45). Direct factory replacement.
Battery Power Connection Sub Cable for TL45, Sting
$75.45
Description
Last reviewed: 14 May 2026 by Talaria USA Editorial Team, 10+ years e-moto rider and mechanic.
The Talaria battery cable (OEM power connection sub-cable) is the high-current wiring harness that connects the battery pack to the controller and BMS on Talaria Sting Offroad (TL3000) and Sting Onroad (TL45). OEM-grade replacement after connector corrosion, insulation damage, or pin-burnout from over-current events.
What the Talaria Battery Cable Fits
Mission-critical wiring — without this cable the bike does not power up. Direct OEM replacement; not interchangeable with aftermarket cable kits. Fitment runs across the Talaria Sting platform, with model-specific notes below.
| Model | Fits | Notes |
|---|---|---|
| Talaria Sting Offroad (TL3000) | Yes | Direct OEM replacement |
| Talaria Sting Onroad (TL45) | Yes | Direct OEM replacement |
| Talaria Sting 4000 (TL4000) | Verify with installer | Connector pinout may differ |
| Talaria with EBMX 72V upgrade | No | 72V conversion uses different harness |
Build Sheet
| Spec | Value |
|---|---|
| Type | Battery power connection sub-cable |
| Items included | Wire harness |
| Compatible models | TL3000, TL45 (verify TL4000) |
| Manufacturer | Talaria (OEM) |
A failed power cable usually shows up as intermittent or no power-up. Common failure points are the high-current pins at the battery and controller ends. See the rest of our Talaria parts catalogue for matching components.
Install Notes
Difficulty: Moderate. Tools: hex keys, multimeter, dielectric grease. Time: 30 minutes. Disconnect battery first. Match cable routing to factory diagram; secure with cable ties at original points. Test continuity end-to-end with multimeter before reconnecting battery.
Frequently Asked
Can I make my own battery cable from raw wire?
Possible but not recommended. OEM cable has specific gauge, insulation rating, and connector terminals that must match controller and BMS specs. Cheap aftermarket cables fail under sustained high-current draw.
Signs my battery cable is failing?
Intermittent power-up, voltage drop under load, melted insulation at connector ends, or corrosion visible at the pin terminals. Replace immediately — running a failing cable risks frame fires.
Trust Signals & Warranty
Talaria covers OEM wiring against manufacturing defects. Talaria USA covers a 30-day return window on unmodified parts and ships from our US warehouse in 2-4 business days.
Quick Comparison
| Battery Power Connection Sub Cable for TL45, Sting | EBMX X-9000 Motor Controller Heat Sink for TL3000 | Hall Effect Sensor for TL45 and Sting | Right Electronic Throttle Assembly for TL45, Sting R, X3 MX | Headlight Assembly for Sting | |
| Image |
|
|
|
|
|
| SKU | — | — | — | — | — |
| Rating | |||||
| Price | $75.45 | $79.99 | $49.99 | $47.99 | $40.00 |
| Component | Battery power connection sub-cable | X-9000 controller heat sink | Hall effect throttle sensor | Right electronic throttle assembly | Headlight assembly |
| Type | High-current wire harness | N/A | Magnetic field sensor | N/A | N/A |
| Manufacturer | Talaria (OEM) | EBMX | Talaria (OEM) | Talaria (OEM) | Talaria (OEM) |
| Fits | TL3000, TL45 | TL4000, TL45 with EBMX X-9000 | TL3000, TL45 | TL4000, TL45, TL50, TL25, TL2500 | TL3000, TL4000 |
| Replaces | Failed pack-to-controller wiring | N/A | N/A | N/A | N/A |
| Material | N/A | Anodised aluminium | N/A | N/A | N/A |
| Function | N/A | Passive thermal management | N/A | N/A | N/A |
| Fixes | N/A | N/A | Throttle stick, no-response, erratic accel | N/A | N/A |
| Includes | N/A | N/A | N/A | Grip + housing + Hall sensor | N/A |
| Lighting tech | N/A | N/A | N/A | N/A | LED |
| Connector | N/A | N/A | N/A | N/A | 2-pin or 4-pin (specify) |
| Description | The Talaria Battery Power Connection Sub Cable is the OEM high-current wiring harness between battery, BMS, and controller for Sting Offroad (TL3000) and Sting Onroad (TL45). Direct factory replacement. | The EBMX X-9000 Motor Controller Heat Sink is a passive thermal-management upgrade for the EBMX X-9000 controller on Talaria Sting 4000 (TL4000) and Sting Onroad (TL45). Anodised aluminium adds ~30% convective surface area — the difference … | The Talaria Hall Effect Sensor is the OEM throttle-position pickup for Sting Offroad (TL3000) and Sting Onroad (TL45). Magnetic-field sensor reads throttle-grip rotation and signals the controller. Replaces failed sensors causing throttle s… | The Talaria Right Electronic Throttle Assembly is the broad-fitment OEM throttle grip + housing + integrated Hall sensor for Sting 4000, Sting Onroad, Sting R Road Legal, X3 L1E, and X3 Offroad. Direct factory replacement. | The Talaria Headlight Assembly is the OEM front LED light for Sting 4000 (TL4000) and Sting Offroad (TL3000). 2-pin and 4-pin connector variants — verify yours before ordering. Direct factory-bracket mount, 15-minute install. |
| Add To Cart | Add to Cart | Add to Cart | Add to Cart | Add to Cart | Add to Cart |
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.